Agriculture Towing Irrigation System
Brand : HUAXINGYULIN
Product origin : DALIAN,CHINA
Delivery time : 20 WORKING DAYS
Supply capacity : 400SETS PER YEAR
About China Yulin
China Yulin Irrigation Equipment Co., Ltd settled in Dalian City of China .Covering the total area of 45,000 square meters, with the total investment of about 40 millions RMB . The completion of phase project is about 30,000 square meters, including the offices and living area of about 5,500 square meters.
China Yulin Irrigation Equipment Co., Ltd worked as the leading manufacturer for irrigation system for 17 year. We had supplied more than 2500 sets of different kinds of large scale irrigation systems for many irrigation companies and client from all over the world.
China Yulin irrigation equipment Co., Ltd is dedicated to the construction and development of Chinese agriculture. We supply advanced irrigation facilities &technology and timely after-sale service to the customers all over the world. We hope to set up long business relationship with you in the near future. Looking forward to your attention.
THTREE WHEEL TOWING IRRIGATION SYSTEM
Three wheel towing irrigation system is a kind of irrigation machine with a tower on swiveling wheels and a central unit on a movable chassis fitting with a drive pipe.
When the wheels keeping aligning with the axle of the span, the whole system will can be moved by a tractor from one land to another land,normally if you have 1 or 2 piece of similar of land and you want to reduce the irrigating cost and you can using the towing irrigation system.
This kind of irrigation system allows a reduction on the cost per hectare irrigated by increasing the are covered by the same machine.
REGIONAL TOWING IRRIGATION SYSTEM
The spans of center pivot irrigation system rotate less than 360 degree , therefore fixing the anchored irrigated surface area when the machine meeting an obstacle (house, tree, hill etc.) situated in the middle of the filed, or where the shape of the land does not allow full rotating irrigation.
An automatic reverse system allows continuous operation whilst the security system ensures that the spans stop at the end of the irrigated zone.We also supply two strong stop frame structure to confirming the machine to stop in the fixed area to keep the whole machine working safely.
SPECIFICATION:
|
Main pipe diameter of sprinkler irrigation machine |
6-5/8 (168mm*3.0mm) |
|
Standard span of sprinkler irrigation machine |
6-5/8"(168mm) *54.5m(8 pipes) |
|
King-sized span |
6-5/8"(168mm) *61.3m (9 pipes) |
|
Cantilever pipe |
5-9/16″(141mm) |
|
King-sized cantilever pipe |
4″(101mm) |
|
Pipe length |
22 feet/one, (6.7m) |
|
Sprayer of sprinkler irrigation machine |
USA Nelson sprinkler or Sennigar sprinkler |
|
Power supply mode |
generator or local power company provide |
|
Main pipe Flange |
Thickness:10mm(double welded technology.) |
|
Working voltage |
460--380V/50--60HZ |
|
Tire type of sprinkler irrigation machine |
14.9 - 24 professional irrigation tire with galvanization rim |
|
Span body tower structure |
adopt “V” model tower |
|
Main cable |
4*4mm²+6*1.5mm²(resisting ultra violet and aging) or high quality 11 core cable(can customerized) |
|
Motor speed reducer |
USA standard motor and gearbox with five year gurantee time |
|
The end |
high quality LED working light |
|
Motor power of sprinkler irrigation machine |
0.75~1.5 horse power |
|
Motor speed reducer |
output speed of electric transmission gear box :28--86RPM |
|
Sprayer spacing |
2.29m (also can customerized ) |
|
Irrigation intake |
1 water inlet in center point |
|
Irrigation intake caliber |
8 inches, the spot water supply pipe is more than 6 inches. |
|
Irrigation intake pressure |
0.20—0.35mpa |
|
Standard irrigation truss height from the ground |
3.2m |
Packaging :
Pipe packing: each line 10 pieces of pipes,and 2 lines bundled together with lifting point, totally 20 pieces of pipe together. each line 5 piecs of pipes,and 4 lines bundled together with lifting point,totally 20 pieces of pipe together.
Angle: central part or span angles will separetly packing to easy workers to do installation when discharge the container.
Motor and Gearbox: fumatory polywood pallet packing together,max 4 layers and each layer max 9 pieces.
Eletricities and connection parts: packing inside of carton and together put in the iron box to protect them.
Shipment:
Pivot irigation machine: 40"GP container can load about 8 span 450m machine, 40"OT container can load about 10 span 550m machine.
Irrgation parts: 20"GP or 40"GP ,finally depand on the quantity of order from client, we can also mixed container or send by air expressing to client.
Why choose US:
Q: Yulin irrigation is trading company or manufacturer ?
A: We worked as the first and the only one OEM irrigation factory in this filed in china ,had produced irrigating machine for 17 year until now, totally produce 8 kinds of different different type large scale irrigation system.
Q: How mang days for your delivery time?
A: Generally it is 20 working days when we got the advance payment from client. Normally we have 50 sets of center pivot irrigation systems in stock, and can ready to ship for client asap.However it will depand on the quantity of order.
Q: Do you deal with dealer or final client?
A: when the fixed market no dealer,we will deal with the final client directly.When the area have dealer and you can only deal with my dealer,if you meet any difficulties during business,welcome to email to us directly,yulin will help you in time.
Q: What is your terms of payment for order?
A: Payment: 30% advanced payment by T/T, 70% before shipment by T/T
If irrigation parts order with little value,also can make the payment by WU or paypal,please email us to talk details.
If you have another question, please feel free to contact with us:
Contact: Lara Yu
Position:Trading Manager
Skype: larabuterfly
Mobile: 0086-15842497638
Wechat： xunyu135
Whatsapp:008615842497638
- Download
- China yulin irrigation new catalog.pdf
